Propane Parts and Supplies

Propane gas is transmitted through various plumbing and piping connections and fittings from the tank to the end appliance(s). Mission Gas Company realizes that any number of repairs or modifications must be made at any given time and we stay prepared. Being a full service propane company requires an inventory of tanks, parts, and repair supplies at our disposal to fully meet the needs of our customers. Our inventory can be described as fully stocked. We carry cylinders of all sizes, propane regulators, gas plumbing supplies, pipe, tubing, fittings, propane carburetion parts, and much more. We also carry parts on hand that are often hard to find. Below are the most common.

LP Gas Regulators

Mission Gas Company stocks a full line of regulators for all types of applications. Our gas regulator inventory includes regulators for both cylinders and tanks. Tank regulators such as first stage, high pressure, second stage and adjustable regulators are available through Mission Gas Company's offices and can often be installed by a delivery driver. Regulators should be replaced after 15 years of service or as recommended by the manufacturer.

Propane Piping and Plumbing

Gas plumbing supplies for fixed piping systems are available for installation and repair purposes for our customers. These gas plumbing and pipe fittings can be sold and installed by our service crew and consist of hard pipe, copper tubing, elbows, unions and a full line of flare fittings.

Cylinder Connections and Hoses

Propane cylinders that use hose for heaters, grills or outdoor cooking applications are available for sale over the counter at any of our locations. Bottle regulators can be fitted to new hose for installation on your cylinder. If there is a specialty hose or bottle connection needed, our service department can often make it while you wait.

Appliance Valves and Flex Lines

Appliance flex lines and fixed piping wall valves can be properly sized and fitted to your appliance at your home or office. Flex lines are for indoor use only and should be inspected regularly for cracks or damage. Valves must be threaded, closed and capped when not in use. Our service department or delivery driver can inspect and replace any needed flex lines or replace old valves that are not up to safety standards.

Tank Fittings and Connections

Replacing ASME tank connections usually requires that the tank be empty before repairs can be made. Mission Gas Company has an extensive inventory of new tank fittings such as relief valves, fill valves, gauges and service valves for stationary propane tanks. Oftentimes, the repair may only require a repair kit, which we also keep plenty of for more economic tank repairs.